Compatibility
8 beta/preview
Package applicability is under review; follow the stated version and platform limits.

Keep the example files together

Copy the complete examples/capacitance/parallel_plates directory to a writable location. The supplied parallelplates.ixi refers to process.ldf. Use that actual project reference when checking the inputs.

Inspect the model in Studio

  1. Open parallelplates.ixi in Studio and check that the extraction mode is EQS.
  2. Review the conductor summary under Electrical setup. The inline geometry labels the two conductors C1 M0 and C2 M1.
  3. Inspect the supplied process definition and parameter d before changing geometry. The example describes plate spacing through the process definition.
  4. For a calculation, resolve Check and run issues, save the project and run the extraction using a valid licence.
Studio EQS Input files showing geometry defined in IXI, process.ldf available and an optional unselected netlist.
This example defines geometry in the IXI, uses process.ldf and does not need an external GDS file or circuit netlist. Open full-size screenshot

Command-line alternative

From the copied example directory, the supplied instructions use:

inductex parallelplates.ixi

Output review pending

The CLI setup was exercised. Numerical reference results are withheld while output-reporting issue KB-EQS-001 remains open.

Keep this project separate from the website's different capacitor bundle. Resolve the reporting issue and review the applicable convergence evidence before presenting a numerical success criterion.

Sources and verification details

Recorded inputs/builds only. Complete walkthrough and final-package acceptance remain separate.

VAL-002 · InductEx® 8.0.1 Windows catalog payload
CLI completion observed; numerical presentation withheld
Numerical results remain withheld while KB-EQS-001 is open. GUI and convergence verification remain pending.

studio-inline-inputs
InductEx® 8 document view, rendered 3 November 2026
Current-source UI illustration. No calculation or complete GUI walkthrough was performed; final-package applicability remains pending.

  • inductex:docs/manual/studio_start.tex · Other first examples
  • inductex:docs/examples/capacitance/parallel_plates/instructions.txt · Owner-authorised filename reconciliation, 2 November 2026; numerical inputs unchanged
  • validation:windows-cli-20261102 · VAL-002; scope and limits recorded
  • owner:technical-review-20261102 · README correction approved; numerical presentation held pending KB-EQS-001
  • capture:studio-ui-20261103T103032 · Reviewed current-source document-view images; UI-only scope
  • SRC-001 resolved with owner authorisation: instructions.txt now names process.ldf, matching the IXI. Numerical inputs were preserved.
  • KB-EQS-001 remains open. Numerical reference values and convergence-summary fields are withheld from the preview; native walkthrough and issue closure remain pending.
Read MarkdownRead structured articleBrowse all guides